发表于 2018-11-23 17:33 | 来自
51CTO网页
[只看他]
楼主
大家好，
我对Juniper的设备不是很了解，设备出现如下问题，还如何解决呢？
进入设备出现如下情况：直接进入linux系统下了。这样情况是什么情况？
*****************************************************************************************************
GNU GRUB version 2.02~juniper/rel_v3~
/----------------------------------------------------------------------------\
|*Juniper Linux |
| Juniper Linux Debug |
| Juniper-Linux-Recovery |
| |
| |
| |
| |
| |
| |
| |
| |
| |
\----------------------------------------------------------------------------/
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line. ESC to return previous
menu.
The highlighted entry will be executed automatically in 0s.
Booting `Juniper Linux'
Loading Linux ...
error: no suitable video mode found.
Booting in blind mode
i8042: No controller found
First Level Bootstrap using initramfs...
^[[0n ^[[0n igb 0000:07:00.3: Hardware Initialization Failure
Mounting boot device LABEL=LINUX-BOOT
Unpacking initrd.cpio.gz ....
1095883 blocks
Unmount boot device LABEL=LINUX-BOOT
INIT: version 2.88 booting
Starting udev
Error: Driver 'ingot_fpga_uio' is already registered, aborting...
cpld i2c resource res->start i2c-mux-cpld 0xfed50010 resource_size 0x5
cpld i2c mapped 0x22586010
cpld i2c number 6
running pre rc steps on SRX1500
disable_srx_boot_device
set_srx_boot_device
4 logical volume(s) in volume group "vg0_vjunos" now active
Starting udev
Error: Driver 'ingot_fpga_uio' is already registered, aborting...
In init_module
In init_module - after register_chrdev
In init_module
In init_module - after register_chrdev
Starting Bootlog daemon: bootlogd.
Starting portmap daemon...
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
kernel.core_uses_pid = 0
kernel.core_pattern = |/etc/init.d/zipcore.sh /var/tmp/corefiles/ %h.%e.%p.%t.core %e
fs.suid_dumpable = 2
vm.swappiness = 1
vm.vfs_cache_pressure = 50
kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e
kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e
kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e
kernel.core_pattern = |/etc/init.d/zipcore.sh /core/ %h.%e.%p.%t.core %e
INIT: Entering runlevel: 3c/init.
Starting system message bus: dbus.
Starting OpenBSD Secure Shell server: sshd
done.
Configuring network interfaces... done.
Starting rpcbind daemon...rpcbind: cannot bind * on udp: Address already in use
rpcbind: cannot bind tcp: Address already in use
done.
creating NFS state directory: done
starting statd: done
starting idmapd: rpc.idmapd: libnfsidmap: requested translation method, 'nsswitch', is not available
rpc.idmapd: Unable to create name to user id mappings.
done
Starting Advanced Configuration and Power Interface daemon: acpid.
acpid: starting up
acpid: 1 rule loaded
acpid: waiting for events: event logging is off
Starting domain name service: named.
starting DNS forwarder and DHCP server: dnsmasq...
dnsmasq: failed to create listening socket for port 53: Address already in use
Starting irqbalance: done
starting 8 nfsd kernel threads: done
starting mountd: done
Starting monit: [ OK ]
starting rsyslogd ... done
Starting internet superserver: xinetd.
* Starting virtualization library daemon: libvirtd
n[ ok ]/bin/dnsmasq found; none killed
Starting tcsd: OK
Starting crond: OK
Checking BIOS and Synchronizing recovery capsule
Synchronizing UEFI key-store:
mount: write error: No space left on device
Booting normal on SRX1500
/root: 5.4 GiB (5772218368 bytes) trimmed
/var: 16 MiB (16789504 bytes) trimmed
/app_disk: 1.3 GiB (1346297856 bytes) trimmed
Executing application: pkg-app-junos
Initializing JUNOS Host applications
[ OK ] Application initialization.
Stopping internet superserver: xinetd.
Starting internet superserver: xinetd.
net.ipv4.ip_forward = 1
Starting SRX
Creating platform specific configurations.
mv: cannot stat '/var/tmp/corefiles/*': No such file or directory
/etc/init.d/rc.junosapp: line 60: cannot create temp file for here-document: No space left on device
/etc/init.d/rc.junosapp Text read from file - hw.chassis.chassis_id=1
key:hw.chassis.chassis_id var:1
chassis_id:1 cluster_id:0
/etc/init.d/rc.junosapp Text read from file - hw.chassis.cluster_id=0
key:hw.chassis.cluster_id var:0
chassis_id:1 cluster_id:0
ha_enabled:TRUE
ifup: interface eth0 already configured
/etc/init.d/rc.junosapp: line 592: echo: write error: No space left on device
/etc/init.d/rc.junosapp: line 336: [: 17G: integer expression expected
20+0 records in
20+0 records out
20 bytes (20 B) copied, 0.000377344 s, 53.0 kB/s
4+0 records in
4+0 records out
4 bytes (4 B) copied, 0.000332874 s, 12.0 kB/s
7+0 records in
7+0 records out
7 bytes (7 B) copied, 0.000330206 s, 21.2 kB/s
add map loop0p1 (252:4): 0 62500 linear /dev/loop0 1
add map loop0p2 (252:5): 0 187500 linear /dev/loop0 62501
stopping idmapd: done
stopping statd: done
creating NFS state directory: done
starting statd: done
starting idmapd: rpc.idmapd: libnfsidmap: requested translation method, 'nsswitch', is not available
rpc.idmapd: Unable to create name to user id mappings.
done
stopping mountd: done
stopping nfsd: done
starting 8 nfsd kernel threads: done
starting mountd: done
/etc/init.d/rc.junosapp: line 145: cannot create temp file for here-document: No space left on device
kdump: unrecognized service
Starting OpenBSD Secure Shell server: sshd
/usr/sbin/sshd is already running
1610
starting rsyslogd ... done
Starting internet superserver: xinetd.
sntpc: unrecognized service
/etc/init.d/rc.junosapp: line 679: echo: write error: No space left on device
Starting crond: FAIL
watchdog: unrecognized service
Starting lcmd: [ OK ]
Starting vehostd: [ OK ]
Starting monit: [ OK ]
stopping mountd: done
stopping nfsd: done
starting 8 nfsd kernel threads: done
starting mountd: done
Processing file: /etc/dh89xxcc_qa_dev0.conf
Stopping Bootlog daemon:
Wind River Linux 6.0.0.15 localhost console
请问这个是什么问题呢?该如何解决，请各位大神帮帮忙，先谢谢了。
